Dans le Service Manual; il est indiqué qu'il faut démonter le capteur ABS "Rear wheel Sensor" (1 vis sur la patte en inox +1 vis de support de câble, semble t'il); et l'étrier de frein "Rear brake caliper" (2 vis).
REMOVING THE REAR WHEEL
NOTICE
Keep magnets (including magnetic pick-up
tools, magnetic screwdrivers, etc.) away
from the rear wheel hub “1”, otherwise the
wheel sensor rotor equipped in the wheel
hub may be damaged, resulting in improper
performance of the ABS system.
1. Stand the vehicle on a level surface.
WARNING
Securely support the vehicle so that there is
no danger of it falling over.
Place the vehicle on a suitable stand so that the
rear wheel is elevated.
2. Remove:
• Rear wheel sensor
• Rear brake caliper retaining bolt
• Rear brake caliper
NOTICE
• Do not operate the brake pedal when removing
the brake caliper.
• Be sure to remove the rear wheel sensor
before removing the rear wheel sensor
housing; otherwise, the sensor could be
damaged.
3. Remove:
• Rear wheel axle “1”
Remove the rear wheel axle with the damper rod
holder (24 mm) “2”.
4. Remove:
• Rear wheel
Move the rear wheel to the right to separate it
from the final drive assembly.
________________________________
Si tu n'as pas fait un wheeling en Vmax, avant 50 ans; c'est que tu as raté ta vie!
Vmax. What else?!
La Vmax; pur archétype fantasmé de la jouissance mécanique sublimée!
Bonjour chez vous!
Steph, Vmax addict.
Accueil 
Évènements 
Wikivmax 
Boire ou conduire , il faut choisir, mais pit'1, on va pô rentrer à pied!
